Question: Can I Use HID Bulbs Without Ballast?

How do you know if it’s the bulb or ballast?

Switch the bulbs with another fixture.

If the other fixture starts acting funny, then it’s the bulbs.

If the same fixture continues to act funny it’s the ballast..

What’s the difference between 35w and 55w ballast?

55W ballasts should only be installed alongside 55W bulbs since you run the risk of running down 35W ballasts much faster if they’re powered by a higher power source. … It means that 35W ballasts should be used with the 35W bulbs and 55w ballasts with 55w bulbs.

How do I know if my HID ballast is bad?

One probe of the multimeter should touch the hot wire connections, while the other touches the neutral wire connections. If the ballast is good, an analog multimeter has a needle that will sweep to the right across the measuring scale. If the ballast is bad, then the needle won’t move.

How many years do HID bulbs last?

An HID bulb should last anywhere from 2,000 to 3,000 hours. That’s up to six times longer than the shortest-lived halogen bulbs. With an HID bulb, you should get several years’ worth of use before the bulb needs to be replaced.

Are HID ballasts universal?

High Intensity Discharge HID conversion digital ballast are a simple, affordable way to replacement your defective ballast from standard halogens to cutting-edge xenon technology. This ballast is universal fit for all aftermarket HID light bulbs as below. —–H1, H3, H4, H7, H8, H9, H10, H11, H13.

Do HID bulbs need a ballast?

All compact fluorescent (CFL) bulbs require a ballast, which is often integrated. All HID bulbs require a ballast, which is sometimes integrated. No LED bulbs require a ballast, although some are engineered to work with an existing ballast.

What does a bad HID bulb look like?

Turn on the HID headlights and wait for the bulb to shut off by itself. Then turn off your headlight switch and immediately turn it back on. This resets the ballast. If the bulb lights with a weak pink/purple color, it’s usually a bad bulb.

Can a bad ballast burn out bulbs?

The ballast itself can go bad, which causes lights to flicker or even appear to be burnt out, when in fact they aren’t. They require maintenance and energy to power, on top of the power used to light the fluorescent bulb.

Why are my HID lights different colors?

New HID bulbs have a color temperature of approximately 4150°K. As a bulb is used, the color shifts to the “bluer” color range of 4,300°K. When first installed, the new bulb will cast a light that is a bit more yellow/white than blue/white. … Be prepared for a difference in headlight colors during this break-in period.

Can I use any HID bulb with my ballast?

Technically speaking you can use any HID bulb with any HID ballast as long as you can connect them.

Do I need to replace both HID bulbs?

One of the many advantages with High Intensity Discharge lamps, as opposed to filament bulbs, is that they last longer – or so we thought. RING advises, therefore, that the HID bulbs of both headlights are replaced every five years. …

Which is better HID or LED?

LEDs are ideal as they are brighter but do not produce the same glare that HIDs are responsible for. LEDs are compact and energy efficient. Unlike the HID, LED headlights provide instant light when turned on. … Like the HID headlight, they shine very brightly and are often mistaken as hi-beams as well.

Can you replace HID bulbs with LED?

LED headlight bulbs aren’t complicated and in many cases indistinguishable in power output, and light beam pattern, from HID bulbs. If you wanted to replace your HID headlight units with LED units, it would be a reasonable idea. … Because you get similar light output and the entire system is less expensive.

Can you use 35w HID bulbs 55w ballast?

You can use 55w ballasts with standard 35w bulbs, but the life of the bulb will be shortened a bit, and their color will Wash Out a bit. … No, HID bulbs and ballasts do not need to be bi-xenon specific when used in a projector based system to be capable of producing light for low and high beam modes.

Is 55w HID better than 35w?

Heat: More power also creates more heat! As power is increased higher in an automotive HID bulb, the bulb gets less efficient. … HID bulbs are designed for 35W, just like all factory-installed OEM HIDs. Running them at 55W of power is just “overdriving” them.